EasySet Pool – What To Expect Week 1

Your first week with your Intex EasySet Pool should be relatively quiet. If this is year 2+ for your pool like me you’re going to see your pool filter look like mine in the video.

It’s a simple fix. Clean it with the hose and reuse it. Also, clean the dirty water out of the pump (just pour it out like I did). Viola! You’re back in business.

Continue reading →

Intex EasySet Installation in 8 Steps

This is the 6th year for my pool. Here are the steps that I’ve taken to install the pool.

  1. Make sure you have a nice level yard
  2. Lay a tarp down
  3. Lay your pool down and clean it
  4. Blow up the ring
  5. Install the inlet/outlets and shutoff valves (don’t forget to make sure the drain plugs are closed!)
  6. Add water – push out the bottom with your feet while filling (don’t go crazy with it – you just want to remove wrinkles) 10 inches is good if you’re like me and have water delivered.
  7. Have water delivered
  8. Hook up pump
Continue reading →

Cleaning EasySet Above Ground Pool – My 2nd Contraption

TRY #2 – Custom Vacuum contraption.

After my first vacuum rig job (linked here) fell apart while using it, I went back to the drawing board. I used what I had lying around the house.

Here’s what I used for my custom vacuum:
* Pool hose – https://amzn.to/2vnRtxk
* Vacuum head from cleaning kit – https://amzn.to/2vkCHaQ

Continue reading →

After The Storm – Draining Pool a Bit and Invention

We have been getting hammered with rain storms. Our EasySet pool has collected, at least, an extra 6 inches of water.

Warning: Keep your water level below the top ring or you risk the whole pool collapsing and losing all your water!

Here’s how I removed some dirt from the pool and lowered our water level at the same time.

Continue reading →

Intex EasySet 18×48 Pool Installation

It’s year FIVE for our pool. TOTALLY WORTH IT!!! Here’s our installation video.

The trick to keep your pool from getting holes/cracks and staying clean is to know what to do and to use the proper accessories/products.

Here’s a list of everything for my pool. Before I started doing it this way my pool was a mess. Now, I spend almost no time maintaining the pool and it stays crystal clear.

My Pool:
* Intex EasySet Pool – 18 x 48 – (https://amzn.to/2uvXarQ)
* Intex 28633EG Krystal Clear Cartridge Filter Pump for Above Ground Pools, 2500 GPH Pump Flow Rate, 110-120V with GFCI (https://amzn.to/2NR5yuR) WORTH EVERY PENNY!
* HTH Super 3″ Chlorinating Tablets (https://amzn.to/2uDNDPo)
* Swimline Large Capacity Floating Chlorine Dispenser (https://amzn.to/2urltI6)
* Intex 59905E Type B Pool Filter Cartridge (6-Pack) (https://amzn.to/2LlwMZ1)
* Intex Deluxe Pool Maintenance Kit for Above Ground Pools (https://amzn.to/2NPyzqG)
* Intex Basic Pool Cleaning Kit (https://amzn.to/2NPEc8q)

EasySet Pool Installation Tips:
1. Start with a LEVEL clean surface (no rocks or debris)
2. Place a tarp on the area and under your pool
3. Clean the pool out of any dirt that may be on it
4. Spread the pool out completely and start filling it with garden hose.
5. Work out wrinkles while filling it with the garden hose (after a couple of inches of water you won’t be able to remove wrinkles!)
6. Use 2 3″ Chlorine tablets (see above) at all times (for a 18×48 pool)
7. Clean the filter once per week.
8. Use the hose to clean off the filter and reuse it – I do at least 2 times before replacing with a new one.
9. Run the pump every night for at least 7 hours.

This will take you a good 15 minutes a week. YES, that is it!

Thanks for watching and have fun!